Racingline high flow inlet elbow for Audi S3 8V / TT Mk3 8S and Octavia VRS
This Whiteline lower front suspension arms kit is made from high density aluminium to offer a significant reduction in weight while providing the strength that is essential for this type of product. This kit allowing an optimal adjustment of the front axle, fits without modifications and consists of two aluminium arms much lighter than the standard ones and pre-installed polyurethane silentblocks!
-
Direct mounting
High density aluminium
Polyurethane Silentblocks
-0.3° camber and +2.0° caster correction
Made in Australia
| Brand | Model | Type | Version |
|---|---|---|---|
| Audi | A3 | 8V / 8.5V - 12-20 | 2.0 TFSI - 190 / 220 |
| Audi | S3 | 8V / 8.5V - 13-20 | 2.0 TFSI - 300 / 310 |
| Audi | SQ2 | GA (1) - 16-20 | 2.0 TFSI - 300 |
| Audi | RS3 | 8V - 15-17 | 2.5 TFSI - 367 |
| Audi | RS3 | 8.5V - 17-21 | 2.5 TFSI - 400 |
This Whiteline lower front suspension arms kit is made from high density aluminium to offer a significant reduction in weight while providing the strength that is essential for this type of product. This kit allowing an optimal adjustment of the front axle, fits without modifications and consists of two aluminium arms much lighter than the standard ones and pre-installed polyurethane silentblocks!
-
Direct mounting
High density aluminium
Polyurethane Silentblocks
-0.3° camber and +2.0° caster correction
Made in Australia
| Brand | Model | Type | Version |
|---|---|---|---|
| Audi | A3 | 8V / 8.5V - 12-20 | 2.0 TFSI - 190 / 220 |
| Audi | S3 | 8V / 8.5V - 13-20 | 2.0 TFSI - 300 / 310 |
| Audi | SQ2 | GA (1) - 16-20 | 2.0 TFSI - 300 |
| Audi | RS3 | 8V - 15-17 | 2.5 TFSI - 367 |
| Audi | RS3 | 8.5V - 17-21 | 2.5 TFSI - 400 |
- Further information -
Our technical specifications and compatibilities refer to the standard equipment of the vehicles mentioned, in case of doubt about the compatibility of a product, please contact our customer service to answer your questions.
Content protected by copyright © 2026 - All rights reserved
Whilteline's bushing kits (W00001 to WZZZZZ, KSK000 to KSKZZZ) are covered for a lifetime, while performance products (BAF000 to BZZZZZ, KCA000 to KCAZZZ, KSB000 to KSBZZZ, KLC000 to KLCZZZ, KDT000 to KDTZZZ) are covered for 3 years from purchase. Fitting kits have a 1-year coverage from the original installation date and the all range have exclusions known as coatings and motorsport use, abuse, alterations, incorrect installation, and maintenance. Defective products need to be shipped prepaid to 4 Warringah Close, Somersby, NSW, 2250, with a copy of the original receipt. If covered, the product will be replaced at no cost, except for the expense in claiming the warranty, borne by the purchaser.