No Instructions
Difficulty Level:
Made in Greece from high quality billet 4340 steel, these ZRP forged connecting rods (compatible with 18mm pin pistons) for the 1.4T engines of the Fiat 500 / 595 Abarth have an I-beam design with AMPCO 18 wrist pin bushings and ARP200 bolts able to support up to 500hp !
-
Direct bolt on (18mm axis)
4 pieces kit
Billet 4340 steel H-beam design
Pin : 18mm
ARP 2000 rod bolts
Length 129mm - PE Width 21.7mm
Housing bore diameter 45.11mm
Made in Greece
- Compatible only with forged pistons with 18mm axis -
| Brand | Model | Type | Version |
|---|---|---|---|
| Abarth / Fiat | 595 / 695 | 312 - 08-... | Abarth - 135 / 140 / 160 |
| Abarth / Fiat | 595 / 695 | 312 - 08-... | Abarth - 165 / 180 / 190 |
Made in Greece from high quality billet 4340 steel, these ZRP forged connecting rods (compatible with 18mm pin pistons) for the 1.4T engines of the Fiat 500 / 595 Abarth have an I-beam design with AMPCO 18 wrist pin bushings and ARP200 bolts able to support up to 500hp !
-
Direct bolt on (18mm axis)
4 pieces kit
Billet 4340 steel H-beam design
Pin : 18mm
ARP 2000 rod bolts
Length 129mm - PE Width 21.7mm
Housing bore diameter 45.11mm
Made in Greece
- Compatible only with forged pistons with 18mm axis -
| Brand | Model | Type | Version |
|---|---|---|---|
| Abarth / Fiat | 595 / 695 | 312 - 08-... | Abarth - 135 / 140 / 160 |
| Abarth / Fiat | 595 / 695 | 312 - 08-... | Abarth - 165 / 180 / 190 |
- Further information -
Our technical specifications and compatibilities refer to the standard equipment of the vehicles mentioned, in case of doubt about the compatibility of a product, please contact our customer service to answer your questions.
Content protected by copyright © 2026 - All rights reserved
The ZRP Limited Warranty covers defects for 30 days after the original purchase by the end-user. It is not transferable and demands proper use; any failure voids the warranty. The warranty is exclusive, disclaiming all other warranties, and releases ZRP from additional obligations or liabilities. If a product is believed to be defective, the original buyer must initiate a specific return process. If covered, ZRP may repair, replace, or refund the product at their own discretion.