For the Audi S5 / S4 3.0 litre Supercharged (B8.5 chassis only), Forge has developed an uprated charge cooler radiator and expansion tank kit. This kit is highly recommended for either those in warm climates who wish to maintain performance, or specifically for tuned engines where the boost has been increased from standard on the Eaton Supercharger using software re-calibration, a reduction pulley or a combination of both. To maximise the cooling efficiency they use an alloy fast thermal transfer radiator core which is 640 x 440 x 42mm. This has proven very effective in both keeping chargecooler temperatures lower but also reducing the recovery times in "heat soaked" situations.
-
Direct bolt on
Size : 25.2" x 17.3" x 1.6"
High quality aluminium made with black finish
Black aluminium cap included
Black silicone hoses included
Hardware and instructions included
Made in UK
| Brand | Model | Type | Version |
|---|---|---|---|
| Audi | S4 | B8 / 8.5 - 09-15 | 3.0TFSI - 333 |
| Audi | S5 | 8T - 07-15 | 3.0 TFSI - 333 |
No reviews yet
*Write your comment here
For the Audi S5 / S4 3.0 litre Supercharged (B8.5 chassis only), Forge has developed an uprated charge cooler radiator and expansion tank kit. This kit is highly recommended for either those in warm climates who wish to maintain performance, or specifically for tuned engines where the boost has been increased from standard on the Eaton Supercharger using software re-calibration, a reduction pulley or a combination of both. To maximise the cooling efficiency they use an alloy fast thermal transfer radiator core which is 640 x 440 x 42mm. This has proven very effective in both keeping chargecooler temperatures lower but also reducing the recovery times in "heat soaked" situations.
-
Direct bolt on
Size : 25.2" x 17.3" x 1.6"
High quality aluminium made with black finish
Black aluminium cap included
Black silicone hoses included
Hardware and instructions included
Made in UK
| Brand | Model | Type | Version |
|---|---|---|---|
| Audi | S4 | B8 / 8.5 - 09-15 | 3.0TFSI - 333 |
| Audi | S5 | 8T - 07-15 | 3.0 TFSI - 333 |
- Further information -
Our technical specifications and compatibilities refer to the standard equipment of the vehicles mentioned, in case of doubt about the compatibility of a product, please contact our customer service to answer your questions.
Content protected by copyright © 2026 - All rights reserved
The Forge Motorsport (Limited) Lifetime Warranty covers only products that have been purchased
directly from an authorised dealer and is not transferable from the original purchaser to a third party.
In case of fails or breaks due to a manufacturing issue or defect, Forge Motorsport we will repair or replace, at no charge to the customer at their own discretion. This service will only be carried out if the product is still in its original design and condition. Lifetime Warranty will not cover any damage or failure caused by improper fitment, incorrect installation, normal wear and tear, normal degradation of material over time or if the product has been exposed to chemical products.
Note : carbon fibre products, manufactured to the highest standards, can lead to discolouration or fading (yellowing) of the carbon fibre due to multpiple external factors and are not warrantied for that eventuality.
Warranty claims or queries can be processed directly through Forge Motorsport website or via a Forge Motorsport Authorized Ditributor.
Audi RS4 B8 / RS5 8T Armaspeed carbon fiber air intake Kit
Volkswagen Racing Line high flow panel air filter for Audi S4 and S5 3.0 TFSI B8 / B8.5
Forge Motorsport supercharger pulley kit for Audi S4 / S5 B8...
No reviews yet
*Write your comment here
